Your company closed a PIPE with 108 investors. Now you owe them a resale registration statement, and the selling stockholder table is about to run three pages: one row per investor, most holding a few hundred shares.
On November 17, 2026, SEC staff changed the rules on that table, and on two other questions every PIPE issuer faces. By the end of this post, you’ll know what each interpretation says, see a real 108-row resale table recast under the new test, understand what the PIPE “group” guidance does and doesn’t protect, and have a checklist for your next PIPE resale registration statement.
What did CorpFin release on November 17, 2026?
On November 17, 2026, the SEC’s Division of Corporation Finance released new and revised Corporation Finance Interpretations (CFIs). Three matter most for PIPE issuers: a revised selling stockholder interpretation (Regulation S-K CFI 240.01), a new beneficial ownership “group” interpretation for multi-investor deals (CFI 101.07), and two new Rule 163B testing-the-waters interpretations (CFIs 163.01 and 163.02).
Ropes & Gray’s summary groups the release into three themes: group formation under Sections 13(d) and 13(g), Rule 163B communications, and selling securityholder disclosure. TheCorporateCounsel.net counted nine CFIs in the release, eight new and one revised. The others cover topics such as Form S-3 eligibility and emerging growth company status.
Here’s the short version of the three that matter for PIPEs:
- CFI 240.01 (revised): You can now disclose shares offered by several small, non-affiliated selling stockholders in one aggregate line, even if the group together holds 1% or more of the class.
- CFI 101.07 (new): PIPE investors who negotiate together through a lead investor or common counsel don’t form a Section 13(d) “group” just because of that, if certain conditions are met.
- CFIs 163.01 and 163.02 (new): Testing-the-waters communications under Rule 163B can continue in the 15 days before a road show, and staff won’t treat them as a road show for the 15-day public filing requirement.
How does the new selling stockholder aggregation work?
Under revised CFI 240.01, you may disclose the aggregate number of shares offered by more than one selling stockholder instead of listing each one, as long as each stockholder in the group is a non-affiliate of the issuer and, together with its own affiliates, holds less than 1% of the class being registered before the offering. You must disclose that these conditions are met, for example in a footnote.
What Item 507 normally requires
Item 507 of Regulation S-K requires disclosure about each selling stockholder in a registered offering. That includes any position, office or material relationship with the issuer within the past three years, the amount held before the offering, the amount offered, and the amount and percentage held after it. In a PIPE with many small investors, that produces one row per investor.
What changed
The test moved from the group to the individual holder:
- Old guidance: Staff permitted group disclosure only where the aggregate holdings of the group were less than 1% of the class before the offering. The old text also allowed a few major holders to be listed separately so that the rest could be grouped, but the grouped holders together still had to stay under 1%.
- New guidance: Each holder in the group must be a non-affiliate holding less than 1% (counting its own affiliates). The group as a whole can hold any amount.
The revised CFI text says staff won’t object to aggregate disclosure when those conditions are met. It also says registrants should disclose that the conditions are satisfied, which may be done in a footnote to the selling stockholder table.
The 1% test in plain language
Think of it as a filter applied one investor at a time. For each investor, ask two questions:
- Is this investor an affiliate of the issuer? If yes, list it individually.
- Does this investor, combined with its own affiliates, hold 1% or more of the class being registered before the offering? If yes, list it individually.
Every investor that passes both questions can go into one aggregate line.
Two practical points. First, “together with its affiliates” means related funds must be combined before you apply the test. Three funds under one manager count as one holder. Second, the measurement is “prior to the offering,” so use beneficial ownership as of the date your table is prepared.
What does a real resale table look like under the new rule?
To show the effect, we took a real resale prospectus from 2026 and applied the new test to it. The result: a 108-row selling stockholder table shrinks to about 10 individually named holders plus one aggregate line covering nearly 100 investors.
The filing
RoboStrategy, Inc. filed a resale prospectus on August 7, 2026 covering up to 3,839,233 shares of common stock. The shares came from a pre-listing private placement and a series of PIPE transactions in June 2026. Its selling stockholder section lists 108 holders individually across three pages. Many held 800 shares or fewer, and several held as few as 200 or 300 shares.
One caveat: RoboStrategy is a registered closed-end fund. Its prospectus isn’t governed by Regulation S-K in the same way as an operating company’s Form S-1 or S-3. We use it here only to show how the table length changes. Confirm how the CFI applies to your own registration form.
Our assumptions
The prospectus doesn’t state shares outstanding in the section we reviewed. We estimated about 23.7 million shares from the fund’s reported net assets of $248.9 million and net asset value of $10.51 per share at June 30, 2026. That puts the 1% line at roughly 237,000 shares. We also assumed that funds sharing a manager’s name are affiliates of each other.
Before: the table as filed
All 108 holders are listed by name. Under the old guidance, the issuer could only have grouped holders whose combined holdings stayed under 1%, or about 237,000 shares. That would cover just a slice of the smallest investors. The 97 small holders discussed below hold about 1.56 million shares, roughly 6.6% of the class, far above that limit.
After: the table recast under revised CFI 240.01
Under the new test, these holders would still be named individually:
- Three Anson funds, holding 869,566 shares combined. As affiliates, they’re counted together and exceed 1%.
- Two Pantera funds, holding 527,982 shares combined.
- Two Feynman Point funds, holding 264,675 shares combined.
- Third Life Ventures Inc., holding 316,856 shares.
- Jason Mo, holding 263,157 shares.
- Two holders the prospectus footnotes as related to the fund: one is the adviser or an adviser employee, and the other is an immediate family member of an officer or director. Holders like these should be assessed for affiliate status and listed individually to be safe.
The remaining 97 holders, each under 1% and not an affiliate, could be disclosed in one line, offering about 1,556,997 shares in total. The largest of them hold 171,620 shares each, well below the 1% line.
The result: 108 rows become about 11 rows, a reduction of roughly 90%.
[Editor: confirm the share count denominator and affiliate groupings against the filing before publishing. If you run the same recast in Finrep across other 2026 resale S-1s and S-3s, add the median reduction here.]
Do PIPE investors form a 13(d) “group” when they negotiate together?
Not just because they negotiate together. New CFI 101.07 says investors that independently decide to join an issuer’s equity transaction don’t form a group simply because they communicate with each other and jointly negotiate terms through a lead investor or common counsel. Each investor must sign in its own capacity, and the agreements can’t require the investors to act together.
Why this matters
If PIPE investors are a “group” under Exchange Act Sections 13(d)(3) and 13(g)(3), their holdings are combined. A group that crosses 5% of a class must report on Schedule 13D or 13G. A group above 10% can also create Section 16 insider status for its members. In practice, the fear of group status has pushed investors to negotiate separately, which slows deals down.
The conditions in CFI 101.07
According to the SEC’s text of the interpretation, the scenario covers an issuer’s equity transaction with multiple investors, such as a private placement, a registered direct offering, or an equity or convertible note exchange offer. It may also involve a lock-up or similar commitment to participate. These conditions apply:
- The investors communicate about the deal terms among themselves and jointly negotiate with the issuer or its agents, using a lead investor or common legal counsel as their representative.
- The transaction agreement, and any lock-up or participation commitment, is signed by each investor in its individual capacity.
- Those agreements give no investor rights or remedies against any other investor about acquiring, holding, voting or disposing of the securities, and don’t require the investors to act together on those matters.
Staff’s answer is that these activities, done for the purpose of participating in the transaction, would not by themselves make the investors a group.
What CFI 101.07 doesn’t protect
Ropes & Gray stresses that the CFI is not a blanket safe harbor. Staff expressly keep a separate facts-and-circumstances analysis for any other agreements, understandings, arrangements or concerted actions about acquiring, holding, voting or disposing of the issuer’s securities, including through an intermediary.
Watch for these risk areas after closing:
- Post-closing coordination. Agreements to vote together, nominate directors together, or coordinate sales go beyond the CFI.
- Investor-to-investor rights. Side letters or agreements that give one investor rights against another fall outside the conditions.
- Intermediaries. The CFI notes that concerted action through an intermediary can still form a group, so placement agent and lead-counsel conduct matters.
Courts look at this conduct too. Cleary Gottlieb’s discussion of a recent group-formation case highlighted facts such as a placement agent revealing intended investor identities and a lead investor’s counsel trading drafts with other investors.
What changed for Rule 163B testing-the-waters communications?
Two new CFIs clarify how Rule 163B fits with the 15-day public filing rule. Testing-the-waters communications may continue during the 15 days between publicly filing a registration statement and starting the road show. Staff also won’t object if issuers don’t treat those communications as a road show for Section 6(e) and the Division’s draft registration statement policy.
The background
Rule 163B lets any issuer, or someone authorized on its behalf, communicate with qualified institutional buyers and institutional accredited investors before or after filing a registration statement, to gauge interest in an offering.
Separately, issuers that submit draft registration statements confidentially must publicly file at least 15 days before starting a road show. For emerging growth companies, this comes from Securities Act Section 6(e); for other issuers, from the Division’s nonpublic review policy. The question was whether testing-the-waters meetings count as a “road show” that starts the 15-day clock.
What the CFIs say
According to TheCorporateCounsel.net’s summary:
- CFI 163.01 confirms that testing-the-waters communications may continue during the 15 days between public filing and the road show.
- CFI 163.02 says staff won’t object if issuers don’t treat Rule 163B communications as a road show for Section 6(e) and the draft registration statement policy.
Why PIPE issuers should care
A traditional PIPE is a private placement and doesn’t rely on Rule 163B. But many issuers weigh a PIPE against a registered direct or underwritten offering. The new CFIs make early investor conversations easier on the registered path. That’s worth factoring into the choice between the two.
What’s in the drafting checklist for your next PIPE resale registration?
Plan the selling stockholder table, the group-formation analysis and the communications strategy together, starting at signing. Collect the ownership and affiliate data you’ll need from each investor up front, then apply the 1% test holder by holder. Use these eight steps for your next PIPE resale registration:
- Collect the right questionnaire data. Ask each investor for beneficial ownership, affiliates, and any relationship with the issuer within the past three years.
- Combine affiliates first. Group related funds and entities before applying the 1% test.
- Apply the test holder by holder. List any affiliate of the issuer, and any holder at or above 1% with its affiliates. Aggregate the rest.
- Add the required footnote. State that each holder in the aggregate line is a non-affiliate holding less than 1% of the class, with its affiliates, before the offering.
- Fix your measurement date. Measure holdings “prior to the offering,” and use one consistent date for the whole table.
- Structure PIPE documents for CFI 101.07. Have each investor sign individually, and avoid investor-to-investor rights or requirements to act together.
- Review post-closing arrangements. Check side letters, voting agreements and lock-ups for terms that go beyond the CFI.
- Plan offering communications. If you’re considering a registered alternative, build Rule 163B communications into the timeline.
Tip: Add the aggregation footnote and the affiliate check to your registration rights agreement checklist. Recasting a long table at the last minute invites errors.
How can Finrep help?
Finrep is an AI-powered SEC reporting and financial disclosure intelligence platform. Fina, Finrep’s AI assistant, searches more than 10 million SEC filings, so your team can pull recent resale S-1s, S-3s and prospectuses, compare how peers present selling stockholder tables, and find PIPE agreement and footnote language to adapt. Every answer links back to the source filing.
For how Finrep compares with other research tools, see how Finrep compares to Intelligize for EDGAR research and benchmarking.
Frequently asked questions
What does revised CFI 240.01 allow?
Revised Regulation S-K CFI 240.01 lets an issuer disclose the aggregate number of shares offered by several selling stockholders instead of listing each one. Each stockholder in the group must be a non-affiliate of the issuer and, with its own affiliates, hold less than 1% of the class being registered before the offering. The issuer should disclose that these conditions are met, for example in a footnote.
How is the new selling stockholder test different from the old one?
The old guidance let issuers group selling stockholders only if the group’s combined holdings were less than 1% of the class. The new guidance applies the 1% test to each stockholder individually, together with its affiliates. As long as each grouped stockholder is a non-affiliate under 1%, the group as a whole can hold 1% or more.
Does negotiating a PIPE through a lead investor create a 13(d) group?
Not by itself. New CFI 101.07 says investors that independently decide to participate don’t form a group just because they communicate and jointly negotiate through a lead investor or common counsel. Each investor must sign individually, and the agreements can’t give investors rights against each other or require them to act together. Other arrangements still get a separate facts-and-circumstances analysis.
Do testing-the-waters meetings count as a road show?
Under new CFI 163.02, staff won’t object if issuers don’t treat Rule 163B testing-the-waters communications as a road show for Securities Act Section 6(e) and the Division’s draft registration statement policy. New CFI 163.01 also confirms that these communications may continue during the 15 days between public filing and the start of the road show.
How can Finrep help with resale registration statements?
Finrep searches more than 10 million SEC filings on EDGAR and returns answers cited to the source filing. Teams use it to find recent resale S-1s and S-3s, compare how issuers present selling stockholder tables and aggregation footnotes, and review PIPE agreement language when structuring deals and drafting registration statements.
Key takeaways
- The 1% test is now per holder. Small non-affiliate holders can share one line, even if together they hold 1% or more.
- Combine affiliates before testing. Related funds count as one holder for the 1% threshold.
- Long tables can shrink sharply. A real 108-row resale table shrinks to about 11 rows under the new test.
- CFI 101.07 helps PIPE investors negotiate together. It’s not a blanket safe harbor; post-closing coordination still matters.
- Testing the waters is more flexible. Rule 163B communications can continue during the 15-day pre-road-show window.







